![](/images/backgrounds/167818/167818-27871x1.png)
The Set IP can detect printers in the same network and display the network information. In addition, this application can configure the network information of the printer that has own network interface card.
Installing Set IP
1Place the
If the
Select Run from the Start menu, type X:\setup.exe in the Open box (Where "X" is the drive letter for the
2Click Next.
3Select Custom installation or Typical installation for a network printer. Click Next.
4Select your printer and then click Next.
NOTES: If your printer is not already connected to the computer, the following window will appear.
•After connecting the printer, click Next.
•If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.
5Check Set IP and then click Next.
2.46GETTING STARTED