Runco DTV-1200 RGB Source with Tri-level Sync to Input 4/5, Component Source to Input 4/5

RGB Source with Tri-level Sync to Input 4/5

Which signal to Input 4/5

RGB input terminals with Tri level sync input or with Tri-level sync on green (BNC terminals). The projector detects automatically where the sync signal is located.

RGB3S or RG3sB input selection

With the remote, press digit button 7

Component Source to Input 4/5

Which signal to Input 4/5

(R-Y)Y(B-Y) input terminals with sync input or with sync on the luminance (Y) input (BNC terminals). The pro- jector detects automatically where the sync signal is located.

Component Video input selection

With the remote, press digit button 6

RS-232 Connection

RS-232 input and RS-232 output of the Projector.

The projector is equipped with a RS-232 port that allows communication with an automation system such as AMX, Crestron, etc.

Applications

a)remote control:

-allow storage of multiple projector configurations and set ups.

-wide range of control possibilities.

-address range from 0 to 255.

b)data communications:

-sending data to the projector or copying the data from the projector to a hard memory device.

Set up of the Baud Rate for Communication with a Computer.

See 'Changing the Baud Rate' in chapter 'Service Mode'.

13