Geometry Adjustments

What can be done?

The geometry adjustments have to be done only on the green image. These adjustments are automatically implemented for the other color images. The following adjustments can be adjusted Left-right (EW) and Top- Bottom Corrections, Blanking, Horizontal Amplitude, Vertical Amplitude, Vertical Linearity and Horizontal Phase.

Start Up

To start up the geometry corrections, perform the following:

1.Push the cursor key or to highlight 'Geometry' (menu 1).

2.Press ENTER to select.

The Geometry menu will be displayed on the screen (menu 2).

RANDOM ACCESS

ADJUSTMENT MODE

PICTURE TUNING

GEOMETRY

CONVERGENCE

FOCUSING

COLOR SELECT

Select with or then <ENTER> <EXIT> to return

menu 1

GEOMETRY

HPHASE RASTER SHIFT

LEFT-RIGHT (E-W)

LEFT SIDE CORRECTION

TOP-BOTTOM (N-S)

H SIZE

V LINEARITY

VSIZE

BLANKING

Select with or then <ENTER> <EXIT> to return

menu 2

Important

The convergence corrections are disabled during geometry corrections. The blanking corrections are only enabled during the blanking adjustments.

Horizontal Phase Adjustments

Start Up

1.Push the cursor key or to highlight 'H Phase' (menu 1).

2.Press ENTER to activate.

The external image with a text box in the middle will be projected.

Note: No horizontal phase adjustment is available on the internal # pattern.

38

Page 40
Image 40
Runco DTV-1200 owner manual Geometry Adjustments, Horizontal Phase Adjustments, Random Access Adjustment Mode