previous page

RED

GREEN

RANDOM ACCESS ADJUSTMENT MODE

SETUP PATTERN SELECTION

COLOR SELECT

CONVERGENCE

FOCUSING

BLUE

RED AND GREEN

BLUE AND GREEN

RED AND BLUE

GREEN ONLY

RED ON GREEN BLUE ON GREEN

RED

GREEN

BLUE

Selecting Setup Pattern

Set up of the Selected Setup Pattern

If an external source is connected to the projector, menu 1 will be displayed.

To select the desired setup pattern, perform the following:

1Push the cursor keys or to highlight the desired setup pattern

2Press ENTER to select.

Choose a setup pattern from below:

SELECTED SOURCE

GENLOCKED PATTERN

INTERNAL # PATTERN

Source 01

Select with or then <ENTER> <EXIT> to return

menu 1

Genlocked pattern: internally generated cross hatch pattern, locked on the scan rate of external source.

Internal # pattern: internally generated cross hatch pattern and locked on internal generated sync signals. (No external source necessary)

If no external source is connected to the projector, the internal cross hatch pattern menu will be displayed.

Note: The menus in this manual are created for an external source, connected to one of the inputs, and the 'Genlocked Pattern' is selected.

32

Page 34
Image 34
Runco DTV-1200 owner manual Selecting Setup Pattern