15
Overview of Functions
This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the
projector remotely.
This remote control is used for source selection, control, adaptation and set-up.
It includes automatic storing of:
- picture controls (Brightness, Sharpness,....)
- settings
Other functions on the control units are:
- switching between standby and operational modes
- switching to "pause" (picture mute)
- direct access to all connected sources
F1
F2 F3 F4
F5
ADJ EXIT
ENTER
PAUSE
PHASE
TEXT
SHARPN
TINT
COLOR
BRIGHTN
CONTR
TREBLE BALANCE
BASS VOL
90
78
56
34
12
1
2
3
5
6
4
7
8
9
1
0
1
8
1
7
1
6
1
5
1
4
1
3
1
2
1
1
1 Function keys: user programmable keys with functions for direct access.
2 ADJ:ADJUST key, to enter or exit the adjustment mode.
3 Address key (recessed key): to enter the address of the projector (between 0 and 9).
Press the recessed address key with a pencil, followed by pressing one digit button between 0 and 9.
4not used
5 PAUSE:mutes the projected image.
6 STBY:stand-by button, toggles power On/Off (Stby).
7 not used
8 not used
9 Digit buttons: direct input selection.
10 Audio controls: not used
11 Picture controls:use these buttons to obtain the desired picture.
12 PHASE: not used.
standby
pause/park
sharpness
tint
color
brightness
contrast