SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERTLINEARITY MID
DIG HOR LINEARITYMID
ASTIGMATISM MIDPOSITION
UNDO ALLSETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERTLINEARITY MID
DIG HOR LINEARITYMID
ASTIGMATISM MIDPOSITION
ALLSETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
69
Undo Astigmatism to Midposition
What can be done?
'Undo Astigmatism midposition' is displayed in the Set Midposition menu
instead of 'Astigmatism midposition' when the latter is pressed. The settings
for the astigmatism can be returned to previous installed settings as long the
projector is playing on the same source ( = same adjustment block).
How to undo the Astigmatism settings to midposition?
1. Push the cursor key or to highlight 'Undo Astigmatism Midposition'
(menu 1).
2. Press ENTER undo. menu 1
SET TO MIDPOSITION
R&B CONVERGENCE MID
GREEN CONVERGENCE MID
FOCUS TO MIDPOSITION
E-W TO MIDPOSITION
N-S TO MIDPOSITION
DIG VERTLINEARITY MID
DIG HOR LINEARITYMID
UNDO ASTIGMATISM MIDPOSITION
ALLSETTINGS TO MIDPOS
Select with or
then <ENTER>
<EXIT> to return.
All Settings to Midposition
What can be done?
All adjustment settings can be set to midposition.
How to set to midposition?
1. Push the cursor key or to highlight 'All Settings to Midposition' (menu 1).
2. Press ENTER to select. Aconfirmation menu will be displayed first (menu 2).
3. Press ENTER to confirm. Press EXIT to cancel the operation 'set all settings to their midposition'.
menu 1
ALLSETTINGS
TOMIDPOSITION
Astigmatism settings
in current block
will be overwritten!
<ENTER> to confirm
<EXIT> to cancel
!
menu 2
Undo All Settings to Midposition
menu 1
What can be done?
'Undo all settings to Midposition' is displayed in the Memory management
menu instead of 'All settings to midposition' when the latter is pressed.
An undo is possible as long as the projector is running on the same source (=
same adjustment block) even when some adjustments as geometry or conver-
gence are already readjusted. When undo is pressed all settings are reset to
the previous settings.
How to cancel 'Set to midposition'?
When "All settings to midpos" is selected, all settings are set to their
midposition. To cancel this action:
1. Push the cursor key or to highlight 'Undo All Settings to midpos'
(menu 1).
2. Press ENTER to cancel the set to midposition action.
Press EXIT to cancel the procedure 'undo set to midposition'.