Runco DTV-1200 owner manual Mains lead Power cord with CEE 7 plug, Power cord with Ansi 73.11 plug

Safety Warning

TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE

Federal Communication Commission (FCC Statement)

This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Note :

The use of shielded cables is required to comply within the limits of Part 15 of FCC rules and EN55022.

•All the safety and operating instructions should be read before using this unit.

•The safety and operating instructions manual should be retained for future reference.

•All warnings on the equipment and in the documentation manuals should be adhered to.

•All instructions for operating and use of this equipment must be followed precisely.

On Safety

1.This product should be operated from an AC power source. Power input is autoranging from 100 V(-10%) to 240V(+6%).

2.All equipment in the system is equipped with a 3-wire grounding plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug.

WARNING FOR THE CUSTOMERS: THIS APPARATUS MUST BE GROUNDED (EARTHED) via the supplied 3 conductor AC power cable. (If the supplied power cable is not the correct one, consult your dealer.)

CEE 7

LINE = BROWN NEUTRAL = BLUE GROUND = YELLOW/GREEN

ANSI 73.11

LINE = BLACK NEUTRAL = WHITE GROUND = YELLOW/GREEN

A. Mains lead (Power cord) with CEE 7 plug:

The wires of the mains lead are colored in accordance with the following code.

Green and Yellow:	earth (safety earth)
Blue:	neutral
Brown:	line (live)

B. Power cord with ANSI 73.11 plug:

The wires of the power cord are colored in accordance with the following code.

Green/Yellow:	ground
White:	neutral
Black:	line (live)

5