Samsung VP-HMX10C/XEK, VP-HMX10/XEF, VP-HMX10C/XEF manual PicBridge, USB connect, Mass Storage

USB

Message	Icon	Informs that...	Action
		A problem occurred when	• Check the USB cable.
Fail Printer			• Try again the connecting procedure as we
	-	connecting the camcorder	instructed.
Connecting
		via USB to a printer.	• Switch “USB connect” function to “Mass
			Storage.”
		A problem occurred when	• Check the USB cable.
Fail USB			• Try again the connecting procedure as we
	-	connecting the camcorder	instructed.
Connecting
		via USB to a PC.	• Switch “USB connect” function to
			“PicBridge.”
Ink Error	-	There are some problems	• Check the ink cartridge.
		with ink cartridge.	• Put the new ink cartridge.
Paper Error	-	There are some problems	• Check the paper in the printer. If there is
		with the paper.	no paper, insert the paper.
		There are some problems	• Your HD camcorder does not support this
File Error	-		file format.
		with file.	• Try another file recorded on your HD
			camcorder
Printer Error		There are some problems	• Turn printer power off and on.
	-		• Contact printer manufacturer service
		with printer.
			centre.
Print Error	-	A problem occurred during	• Do not remove power source or eject
		printing.	memory card during printing.

When there is dew condensation, put the camcorder aside for a while before using

• What is dew condensation?

Dew condensation happens when a HD camcorder is moved to a place where there is a CAUTION significant temperature difference from the previous place. The Dew condenses on the

external or internal lenses of the HD camcorder, and on the reflection lens. When this happens, it may cause a malfunction or damage to the HD camcorder when using the device with the power on while there is dew condensation.

• What can I do?

Turn the power off and detach the battery pack, and leave it in a dry area for 1~2 hours before using it.

• When does the dew condensation occur?

When the device is relocated to a place with a higher temperature than the previous location, or when using it in a hot area suddenly, it will cause condensation.

- When recording outside in cold weather during the winter and then using it indoors. - When recording outside in hot weather after being indoors or inside a car where the

A/C was running.

Note before sending your camcorder for repair.

• If these instructions do not solve your problem, contact your nearest Samsung authorised service centre.

• Depending on the problem, the built-in memory may need to be initialised or replaced and the data will be deleted. Be sure to back up the data on your PC before sending your camcorder for repair.

Samsung cannot guarantee any loss of your data.

USB

訊息		圖示	表示…	措施
				•	檢查 USB 纜線。
Fail Printer		-	在將 USB 介面連接到印表	•	按照說明的連接步驟再試。
Connecting			機時，會出現一些問題。	•	USB connect
					將「	」功能切換為
					Mass Storage
					「	」。
Fail USB				•	檢查 USB 纜線。
		-	在將 USB 介面連接到電腦	•	按照說明的連接步驟再試。
Connecting			時，會出現一些問題。	•	USB connect
					將「	」功能切換為
					PictBridge
					「	」。
Ink Error		-	墨水盒存在一些問題。	•	檢查墨水盒。
				•	放置新的墨水盒。
Paper Error		-	紙張存在一些問題。	•	檢查印表機中的紙張。如果沒有紙張，
					請裝入紙張。
File Error				•	您的 HD 攝錄放影機不支援此種檔案格式。
		-	檔案存在一些問題。	•	在您的 HD 攝錄放影機上嘗試錄製的另一
					個檔案
Printer Error		-	印表機存在一些問題。	•	關閉和開啟印表機電源。
				•	請聯絡印表機製造商維修中心。
Print Error		-	列印時會出現一些問題。	•	切勿在列印時移除電源或彈出記憶卡。
如果存在露水冷凝現象，請在使用前將攝錄放影機閒置一會
•	什麼是露水冷凝？
注意	若將 HD 攝錄放影機移至較先前地方具有很大溫差的地方，就會出現露水冷凝現象。HD
	攝錄放影機外部或內部和反光鏡上會出現露水冷凝現象。若發生此種情況，即當出現露
	水冷凝現象時，可能在通電情況下使用此裝置時會出現故障或損壞 HD 攝錄放影機。

•我該怎樣辦？

關閉電源並取出電池組，然後在使用前 1~2 小時內將其放在乾燥的地方。

•當會發生露水冷凝現象？

當將裝置重新放置在較先前地區溫度更高的地方，或突然在高溫地區使用時，將會發生 冷凝現象。

-先在冬季的寒冷天氣中進行戶外錄製，然後在戶內使用時。

-先在戶外或使用交流電源的車內錄製，然後在高溫天氣中進行戶外錄製時。

將攝錄放影機送去維修之前的注意事項。

•若這些指示不能解決問題，請與最近的三星授權服務中心聯係。

•視問題而定，可能需要初始化或更換內置記憶體，並且資料將會被刪除。 在將攝錄放影機送去維修之前，請務必備份電腦上的資料。

Samsung 不能保證任何資料的丟失情況。

99_ English 臺灣 _99