Exposure, Settings Contents, 動設定曝光： | Samsung VP-HMX10A/HAC specification

using the menu items

•A subject can be shot under various types of lighting conditions indoors (natural, ﬂ uorescent, candlelight, etc.). Because the colour temperature is different depending on the light source, the subject tint will differ depending on the white balance settings. Use this function for a more natural result.

•It is recommended that you specify “Digital Zoom: Off” (page 62) before setting white balance.

•Do not use a coloured object when setting white balance: The appropriate tint cannot be set.

•This function will be set to “Auto” in the EASY Q mode.

•Reset the white balance if lighting conditions change.

•During normal outdoor recording, setting to auto may provide better results.

使用選單項目

•在室內的各種光線條件（自然光線、螢光燈、燭光等）下都可拍攝主體。由於色彩溫度因光源而異，因此主體色調會因白平衡設定而有所不同。使用此功能獲取更自然的效果。

•在設定白平衡之前，建議指定「Digital Zoom:Off」（ 第 62 頁）。

•在設定白平衡時切勿使用彩色物體：無法設定適當的色調。

•在 EASY Q 模式下，此功能將被設定為「Auto」。

•在燈光條件變更時重設白平衡。

•在進行普通戶外錄製期間，設定為自動將可提供更佳效果。

Exposure

The HD camcorder usually adjusts the exposure automatically. You can also manually adjust the exposure depending on the recording conditions.

Settings	Contents	On-
Settings	Contents	screen
		display
Auto	This option automatically adjusts image	None
Auto	brightness according to the environmental light	None
	conditions.
Manual	You can adjust the brightness of an image
Manual	manually. Adjust the brightness when the subject
	is too bright or too dark.

Exposure

HD 攝錄放影機通常會自動調整曝光。根據錄製條件您還可手動調整曝光。

設定	內容	畫面顯
設定	內容	示語言
		示語言
Auto	根據環境光照條件，此選項會自動調整影像亮度。	無
Manual	您可以手動調整影像亮度。在主體太亮或太暗時
Manual	調整亮度。
	調整亮度。

Setting the exposure manually:

When manually setting the exposure, the default setting appears as the value is automatically adjusted according to the environmental light conditions.

Touch decrease () or increase () tab to adjust the exposure while viewing the image on the LCD screen.