8. Appendix B: LUFP7 Gateway GSD File
Module = "IN/OUT: 1 Byte" 0x30 EndModule
;
Module = "IN/OUT: 2 Byte ( 1 word)" 0x70 EndModule
;
Module = "IN/OUT: 4 Byte ( 2 word)" 0x71 EndModule
;
Module = "IN/OUT: 6 Byte ( 3 word)" 0x72 EndModule
;
Module = "IN/OUT: 8 Byte ( 4 word)" 0x73 EndModule
;
Module = "IN/OUT: 10 Byte ( 5 word)" 0x74 EndModule
;
Module = "IN/OUT: 12 Byte ( 6 word)" 0x75 EndModule
;
Module = "IN/OUT: 14 Byte ( 7 word)" 0x76 EndModule
;
Module = "IN/OUT: 16 Byte ( 8 word)" 0x77 EndModule
;
Module = "IN/OUT: 32 Byte (16 word)" 0x7F EndModule
;
Module = "IN/OUT: 64 Byte (32 word)" 0xC0,0x5F,0x5F EndModule
;
Module = "IN/OUT: 128 Byte (64 word)" 0xC0,0x7F,0x7F EndModule
;
Module = "INPUT: 1 Byte" 0x10 EndModule
;
Module = "INPUT: 2 Byte ( 1 word)" 0x50 EndModule
;
Module = "INPUT: 4 Byte ( 2 word)" 0x51 EndModule
;
Module = "INPUT: 6 Byte ( 3 word)" 0x52 EndModule
;
Module = "INPUT: 8 Byte ( 4 word)" 0x53 EndModule
;
Module = "INPUT: 10 Byte ( 5 word)" 0x54 EndModule
;
Module = "INPUT: 12 Byte ( 6 word)" 0x55 EndModule
;
Module = "INPUT: 14 Byte ( 7 word)" 0x56 EndModule
;
Module = "INPUT: 16 Byte ( 8 word)" 0x57 EndModule
;
Module = "INPUT: 32 Byte (16 word)" 0x5F EndModule
;
Module = "INPUT: 64 Byte (32 word)" 0x40,0x5F EndModule
;
Definition of the “IN/OUT” (inputs size = outputs size), “INPUT”, and “OUTPUT” modules.
Modularity: under SyCon, one can combine all three types of modules (I/O, inputs, and outputs), up to the maximum number of modules “Max_Module”, the maximum number of input bytes “Max_Input_Len”, the maximum number of output bytes “Max_Output_Len”, and the total maximum number of input and output bytes “Max_Data_Len”. You must not exceed any of these four limits.
Example 1: should the gateway exchange 83 input bytes and 33 output bytes, you could combine the following modules:
• INPUT: | 64 | Byte ( 32 | word) | |
• INPUT: | 16 | Byte ( | 8 | word) |
• INPUT: | 2 | Byte ( | 1 | word) |
• INPUT: | 1 | Byte |
| word) |
• OUTPUT: | 32 | Byte ( 16 | ||
• OUTPUT: | 1 | Byte |
|
|
Example 2: should the gateway exchange 33 input bytes and 34 output bytes, you could use the following combination:
•IN/OUT: 32 Byte (16 word)
•INPUT: 1 Byte
•OUTPUT: 2 Byte ( 1 word)
93
