U N P A C K I N G A N D I N S T A L L A T I O N I N S T R U C T I O N S
Unpacking and Examining Your Oven
Remove:
1.all packing materials from inside the oven cavity. Read enclosures and SAVE the Operation Manual.
2.the feature sticker from the outside of the door, if there is one.
Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surfaces, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven and contact your dealer or SHARP AUTHORIZED SERVICER.
Door seals and sealing surfaces
Door |
|
hinges |
|
Latch | Oven cavity |
Choosing a Location for Your Oven
You will use your oven frequently so plan its location for ease of use. Do not place the oven on a mat, carpet or tablecloth or block the ventilation openings. The oven must be placed on a countertop which is a minimum of 36 inches (91.5 cm) from the floor. Allow at least 2 inches (5.1 cm) on the sides, and 4 inches (10.2 cm) above the top, and 2 inches (5.1 cm) at the rear of the oven for air circulation. Be sure to position oven so that the rear cannot be touched inadvertently.
4
