Press the [BLACK & WHITE START] key ( ) to scan the front of the card.
5
To cancel scanning...
Press the [STOP] key ( ).
Turn the card over so that the back is face down, and press the [BLACK & WHITE START] key () to scan the back of the card.
6
Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.
To cancel scanning...
Press the [STOP] key ( ).
Touch the [Read-End] key.
Place next original. | (Pg.No.x) |
Press [Start]. |
|
When finished, press |
7 | Configure |
If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, resolution, scan size, and send size.
• The ratio cannot be specified and "Rotation Sending Setting" cannot be selected.
• This function cannot be used in direct transmission mode or when the speaker is used to dial.
To cancel Card Shot...
Touch the [Cancel] key in the screen of step 3.
78