Issue 10/06 | Contents |
Contents |
|
|
1 | Installation | 5 |
1.1 | Clearance distances for mounting | 5 |
1.2 | Mounting dimensions | 5 |
2 | Electrical Installation | 6 |
2.1 | Technical Specifications | 6 |
2.2 | Power Terminals | 13 |
2.3 | Control terminals | 21 |
2.4 | Block diagram | 22 |
3 | Factory setting | 23 |
3.1 | 50/60 Hz DIP switch | 23 |
4 | Communications | 24 |
4.1 | Establishing communications MICROMASTER 440 ⇔ STARTER | 24 |
4.2 | Establishing communications MICROMASTER 440 ⇔ AOP | 24 |
4.3 | Bus interface (CB) | 25 |
5 | BOP / AOP (Option) | 26 |
5.1 | Buttons and their Functions | 26 |
5.2 | Changing parameters using as an example P0004 "Parameter filter function" | 27 |
6 | Commissioning | 28 |
6.1 | Quick commissioning | 28 |
6.2 | Motor data identification | 32 |
6.3 | Magnetizing current | 32 |
6.4 | Commissioning the application | 34 |
6.4.1 | Serial Interface (USS) | 34 |
6.4.2 | Selection of command source | 34 |
6.4.3 | Digital input (DIN) | 35 |
6.4.4 | Digital outputs (DOUT) | 36 |
6.4.5 | Selection of frequency setpoint | 37 |
6.4.6 | Analog input (ADC) | 38 |
6.4.7 | Analog output (DAC) | 39 |
6.4.8 | Motor potentiometer (MOP) | 40 |
6.4.9 | Fixed frequency (FF) | 41 |
6.4.10 | JOG | 42 |
6.4.11 | Ramp function generator (RFG) | 43 |
6.4.12 | Reference/limit frequencies | 44 |
6.4.13 | Inverter protection | 45 |
6.4.14 | Motor protection | 45 |
6.4.15 | Encoder | 47 |
6.4.16 | V/f control | 48 |
MICROMASTER 440 | 3 |
Operating Instructions (Compact) |
