Siemens 7SA511 manual Address Copy Action, Selecting the Active Parameter Set

7SA511 Line Protection RelayChapter 5

Table 5-5.Parameter Set Copy Options.

Address Copy Action

8510

8511

8512

8513

8514

8515

8516

8517

8518

8519

8520

8521

8522

8523

8524

8525

Copy ORIG.SET to Set A

Copy ORIG.SET to Set B

Copy ORIG.SET to Set C

Copy ORIG.SET to Set D

Copy Set A to Set B

Copy Set A to Set C

Copy Set A to Set D

Copy Set B to Set A

Copy Set B to Set C

Copy Set B to Set D

Copy Set C to Set A

Copy Set C to Set B

Copy Set C to Set D

Copy Set D to Set A

Copy Set D to Set B

Copy Set D to Set C

5.8.2 Selecting the Active Parameter Set

The active set of parameters can be changed during relay operation using either the operator panel, through a serial port, or by means of the binary inputs. The following example procedure uses the operator panel to change the active parameter set.

1.As shown below, the presently active parameter set can be determined by displaying address

8501. SETA8501ACTIVPARAM

2.To change the active parameter set, select address 8503. “ACTIVATION zSET A” appears on the displaySET8503ACTIVATION. PlaceAthe relay in programming mode as instructed in section 5.3.2.

July 27, 1995 5-21