Siemens OptiPoint 410 Setting up a conference, Starting a conference from a single call

Making Calls – Convenience Functions

Step by Step
	or
	p
> Start conference?	:
	p
Conference?	:
Conf.1-2-3
Add on to conference?
Consultation?	:
	p
> Conference?	:
Call pickup
> Conference?	:
42

Setting up a conference

You can set up a conference from any of the following types of connection:

•single call

•consultation call

•waiting call

Starting a conference from a single call

You want to set up a conference.

You receive a call.

You call another user.

Select and confirm.

Call the second user.

Announce that a conference is to be set up.

Confirm.

You will receive the message "1 is your position". This question will then be displayed.

Setting up a conference from a consultation call

You are connected to one user and call a second user.

Confirm.

Call the second user. The second user answers, you an- nounce the conference.

Select and confirm.

You will receive the message "1 is your position".

Setting up a conference from a waiting call

You are connected to one user and receive another call.

An alerting tone is audible. The lamp flashes. Press the key. You are connected to the waiting caller. The other party is placed on hold.

Select and confirm.

You will receive the message "1 is your position". All members are interconnected in a conference circuit.