Siemens OptiPoint 410 Advice for users, Care of the telephone, Troubleshooting

Models: OptiPoint 410

1 108
Download 108 pages 970 b
Page 99
Image 99

Advice for users

Advice for users

Care of the telephone

Use either a damp cloth or an antistatic cloth to clean the telephone. Never use a dry cloth!

If the telephone needs to be cleaned thoroughly, use a neutral, diluted, surface-active cleaning agent. Ensure that all traces of the cleaning agent are removed with a damp cloth (using water only!).

Never apply a cleaning agent that contains alcohol or that is liable to harm plastic surfaces; never use an abrasive cleaning powder.

Troubleshooting

There is no response after a key has been pressed:

Check whether the key has become stuck.

No ringing tone when an incoming call is received:

Check whether you have activated the Do Not Disturb function Æ page 70. If you have, cancel this function to receive calls again.

You cannot dial a number:

Check whether you have locked the telephone Æ page 72. If you have, un- lock the telephone to make calls again.

The time shown on the display is not correct:

After 24 hours at the latest, the time is corrected automatically (overnight).

All other faults:

First contact the service personnel. If the fault cannot be eliminated, Customer Service must be called in.

99

Page 99
Image 99
Siemens OptiPoint 410 operating instructions Advice for users, Care of the telephone, Troubleshooting