7.3 Command Summary (by functional group)
System Information Queries | See Section: | |
QV | Query Firmware Version | 7.4.1 |
QN | Query Controller Serial Number | 7.4.2 |
QR | Query Controller Temperature Range | 7.4.3 |
QS | Query Setpoint & Control Probe Number | 7.4.4 |
QF | Query Setup Parameter (binary) | 7.4.5 |
QFA | Query Setup Parameter (ASCII hex) | 7.4.5 |
Operation Information Queries & Commands | See Section: | |
RS | Request Status Byte (binary) | 7.5.1 |
RSA | Request Status Byte (ASCII hex) | 7.5.1 |
RE | Request Error Byte (binary) | 7.5.2 |
REA | Request Error Byte (ASCII hex) | 7.5.2 |
QE | Query Error/Status Flag String (binary | 7.5.3 |
QEA | Query Error/Status Flag String (ASCII hex) | 7.5.3 |
QC | Query Last Command String | 7.5.4 |
ES | Enable SRQ | 7.5.5 |
DS | Disable SRQ (Default) | 7.5.6 |
PT | Read Probe n Temperature | 7.5.7 |
Setup Commands | See Section: | |
SC | Set Correction for Probe n | 7.6.1 |
WP | Set PID Constants | 7.6.2 |
BF | Blowers off (Enable Blower | 7.6.3 |
BO | Blowers on (Disable Blower | 7.6.3 |
SL | Set UUT Temperature Limits | 7.6.4 |
SD | Set UUT Temp. Differential Limits | 7.6.5 |
UP | Write Current Parameters to NV Memory | 7.6.6 |
System Operation Commands | See Section: | |
SI | Select Immediate Execution Mode | 7.7.1 |
SP | Select Program Mode (Default) | 7.7.2 |
PN | Select Probe n for Control | 7.7.3 |
GT,GTF | Go to Temperature | 7.7.4 |
RA, RAF | Ramp to Temperature | 7.7.5 |
DL | Delay (hold) for Interval | 7.7.6 |
CO | Turn Refrigeration Compressor On | 7.7.7 |
CF | Turn Refrigeration Compressor Off | 7.7.7 |
TO | Turn Aux/Power Port On | 7.7.8 |
TF | Turn Aux/Power Port Off | 7.7.8 |
QU | Quit Controlling (return to idle state) | 7.7.9 |
58 | C4 Manual Rev 7.5.2 |
