Sigma C4 manual Displaying the Field Values

Field	Field Purpose	Permitted Field	Factory Setting
#		Values
25	Chamber/Platform Lower	-200/C	As required
	Operating Temperature Limit	-327.9/F	Default = -100
26	Chamber/Platform Upper	500/C	As required
	Operating Temperature Limit	932/F	Default = 200
27	Unit Under Test (UUT) Lower	-200/C	As required
	Operating Temperature Limit	-327.9/F	Default = -100
28	Unit Under Test (UUT) Upper	500/C	As required
	Operating Temperature Limit	932/F	Default = 200
	Unit Under Test (UUT) Lower	From 1 to full
29	Operating Temperature	controller range	Full controller
	Differential Limit	(ie.: 300 for a -100	range (ie.: 300
	Unit Under Test (UUT) Upper	to +200	for a -100 to
30	Operating Temperature	controller)	+200 controller)
	Differential Limit

Note: The setup field parameters are stored in non-volatile memory that is retained even during power down.

8.1 Displaying the Field Values

The contents of field 0 is displayed upon entering the Setup mode. To display the next field, press <DISP/CNTL>. Pressing <DISP/CNTL> after field 30 will cause field 0 to be re-displayed. Pressing <DISP/TEMP> will scroll backward. Entering a 2 digit number and pressing <ENTER> will display the entered field without having to scroll through the list.

C4 Manual Rev 7.5.2 83