Step | Displayed |
|
|
|
| |
Step . | Keys to press | Description of entry | ||||
Number | ||||||
Substep |
|
|
|
| ||
|
|
|
|
| ||
| 00.0 | CLEAR/ENTRY | 45.2 | ENTER | Go to 45.2/C | |
| 00.1 | CLEAR/ENTRY | 5 | ENTER | Use 5 minute ramp time | |
0 | 00.2 | CLEAR/ENTRY | 2 | ENTER | Hold temperature for 2 minutes | |
| 00.3 | DISP/CNTL |
| Accept default value of 1 | ||
| 00.4 | DISP/CNTL |
| Accept default value of 1 | ||
| 01.0 | CLEAR/ENTRY | 32.3 | ENTER | Go to 32.3/C | |
| 01.1 | CLEAR/ENTRY | 2 | ENTER | Use 2 minute ramp time | |
1 | 01.2 | CLEAR/ENTRY | 6 | ENTER | Hold 32.3/C for 6 minutes | |
| 01.3 | DISP/CNTL |
| Accept default value of 2 | ||
| 01.4 | DISP/CNTL |
| Accept default value of 1 | ||
| 02.0 | CLEAR/ENTRY | 50.1 | ENTER | Go to 50.1/C | |
| 02.1 | DISP/CNTL |
| Accept default value of 0 | ||
2 | 02.2 | CLEAR/ENTRY | 9900 | ENTER | Do not hold at this temperature | |
| 02.3 | DISP/CNTL |
| Accept default value of 3 | ||
| 02.4 | DISP/CNTL |
| Accept default value of 1 | ||
| 03.0 | CLEAR/ENTRY | Go to | |||
| 03.1 | DISP/CNTL |
| Accept default value of 0 | ||
3 | 03.2 | CLEAR/ENTRY | 3 | ENTER | Hold | |
| 03.3 | CLEAR/ENTRY | 100 | ENTER | End program | |
| 03.4 | DISP/CNTL |
| Accept default value of 1 | ||
To run this program, set the program pointer to the first program step (00) and then start the program using the following key sequence:
00 <DISP/CNTL><START/STOP>
92 | C4 Manual Rev 7.5.2 |
