Sigma manual LCD display shows Welcome to the Altera DE2-70

DE2-70 User Manual

At this point you should observe the following:

•All user LEDs are flashing

•All 7-segment displays are cycling through the numbers 0 to F

•The LCD display shows Welcome to the Altera DE2-70

•The VGA monitor displays the image shown in Figure 2.3.

•Set the toggle switch SW17 to the DOWN position; you should hear a 1-kHz sound

•Set the toggle switch SW17 to the UP position and connect the output of an audio player to the Line-in connector on the DE2-70 board; on your headset you should hear the music played from the audio player (MP3, PC, iPod, or the like)

•You can also connect a microphone to the Microphone-in connector on the DE2-70 board; your voice will be mixed with the music played from the audio player

Figure 2.3. The default VGA output pattern.

10