Sigma DE2-70 manual Setup for the TV box PIP demonstration

DE2-70 User Manual

RCA type, then an adaptor will be needed to convert to the mini-stereo plug supported on the DE2-70 board; this is the same type of plug supported on most computers

•Load the bit stream into FPGA.

•The detailed configuration for switching video source of main and sub window are listed in Table 6.1.

Figure 6.4 illustrates the setup for this demonstration.

VGA(LCD/CRT)Monitor

VGA Out

To

TV_to_VGA PIP_Control

Figure 6.4. The setup for the TV box PIP demonstration.

Configuration	VGA Display Mode	Video source
SW[17] = OFF;	Signal display mode	Video in 2

71