Connecting to a Wi-Fi router without WPS support Details
Case D
Connecting to an available Wi-Fi network Details
Manual setup
Set up a Wi-Fi network connection manually; connect to an access point for which the SSID is set to be invisible. See Details.
Case A: A WPS-compatible Wi-Fi router with WPS button
The Reader is compatible with WPS (Wi-Fi Protected Setup), which lets you easily make a Wi-Fi connection using the “WPS” or “Connect” button on your WPS-compatible Wi-Fi router. Make sure to turn on [Wi-Fi] and tap [Wi-Fi Settings] on the [Wireless Network Settings] screen. Alternatively, you can turn on [Wi-Fi] by tapping the status bar and tapping [Wi-Fi Settings].
1.Tap [WPS Push-Button Configuration] 
[Start].
2.On your Wi-Fi router, press the “WPS” or “Connect” button within 2 minutes.* The Reader automatically attempts to establish a Wi-Fi connection.
*The name of the button on your Wi-Fi router may vary.
“WPS” or “Connect” button
3.After the Reader screen shows the setup completion, tap [OK].
The wireless connection status is displayed in the status bar. See Details. For more technical notes, see Details.
