To

Description

 

 

 

 

 

Tap [Yes] to install the Reader software, or transfer files from your

 

computer to the Reader while charging. The Reader cannot be

 

operated during transfer.

 

 

 

After the USB storage screen is displayed on the Reader, it is

Install the Reader

detected on your computer, and the “READER” and “SETUP” drives

software, or

appear on your computer.

 

 

transfer data

When the

icon* turns into the

icon, charging is complete.

 

When charging is complete, disconnect the USB cable from the

 

Reader and your computer.

 

 

 

After a short time, the [Home] screen will appear.

 

* This icon is only displayed when the Reader is in data transfer mode.

 

 

 

 

Tap [No], or press the

(Back) button, to return to the previous

 

screen.

 

 

 

 

 

Alternatively, press the

(Home) button. The [Home] screen

Charge the Reader

appears. When the

icon turns into the

icon, charging is

complete.

 

 

 

 

 

In this mode, the Reader is not detected by your computer*. When

 

charging is complete, disconnect the USB cable from the Reader and

 

your computer.

 

 

 

 

* This situation may vary, depending on the settings of your computer.

 

 

 

 

 

 

Note

Your computer must be turned on to charge the Reader. The Reader will not be charged if your computer enters sleep mode or standby mode. Keep your computer turned on with a stable and continuous power supply while charging the Reader.

The (Power) button cannot be used when the Reader is connected to your computer and

29

Page 29
Image 29
Sony PRS-T2, PRST2WC, PRST2BC manual Description, Install the Reader, Software, or, Transfer data, Charge the Reader