Installing and Con®guring

The Remote Library Manager Console feature can use one of two communication protocols to establish communications between the remote (controlling workstation) console and the 3494 (target workstation) library manager. To establish communications between the remote library manager console and the 3494, the communications protocol and LAN adapter protocol support must be properly con®gured. Con®guration is handled by the installation program, which is on the Remote Library Manager Console feature disk. Review the Remote Library Manager Console feature installation instructions to understand the following:

vHow the remote library manager console and 3494 library communications are integrated

vHow the names and addresses are used to con®gure the communications protocol

Starting DCAF on the Remote Library Manager Console

Starting DCAF on the remote library manager console automatically causes DCAF to start on the library manager. To start the remote library manager console program, do the following steps:

1.Start the Communications Protocol on the remote (controlling workstation) console.

2.Choose the Distributed Console Access Facility group. (See Figure 151.)

Figure 151. Icon for Distributed Console Access Facility

3. Choose DCAF Controller (See Figure 152.)

Figure 152. Distributed Console Access Facility Icon

After the IBM logo is displayed, the controlling main window appears. (See

Figure 153 on page 243.)

242Magstar 3494 Tape Library Operator Guide

Page 264
Image 264
IBM Magstar 3494 manual Installing and Conguring, Starting Dcaf on the Remote Library Manager Console