Figure 56. Mark Accessor Active Pop-Up Window

Once you select an accessor to leave active, the library manager displays the Dual Active Accessor Status Pop-Up Window. See Figure 57.

Figure 57. Dual Active Accessor Status Pop-Up Window Ð Disabling

Lockup Library Manager

Locks the keyboard and display until the system administrator's password is entered.

Shutdown

The Shutdown option prepares the library manager for the power-off procedure. If the library manager is currently in the Offline state and Pause mode, the volume database is stopped, ®les are closed, and the library manager program is ended. The system administrator password is required to initiate the shutdown procedures if the password option is chosen. (See ªSystem Administrator Passwordº on page 200 for instructions to set the administrator password.)

Select Shutdown from the Mode pull-down or press the F3 key to cause the System Administrator Password pop-up window to appear. See Figure 58 on page 109.

Note: This window will only appear if the password option is chosen.

108Magstar 3494 Tape Library Operator Guide

Page 130
Image 130
IBM Magstar 3494 manual Lockup Library Manager, Shutdown