6.Select the desired Output Device radio button and enter the Filename if A: is selected.

7.Insert a non-write protected diskette in the A: drive if A: was selected.

8.Select the Create list button. An Operation In Progress message is displayed during the list operation.

9.A completion message is displayed when the operation is complete.

v Find all volumes starting with BCD in rack 4 and display their locations and category.

1.Select Volser for Output Column 1.

2.Select Category for Output Column 2.

3.Select Home for Output Column 3.

4.Check the Speci®c Rack checkbox.

5.Select rack 4 in the associated drop-down list.

6.Check the Volser Mask checkbox.

7.Enter BCD* in the Volser Mask entry ®eld.

8.Select the desired Output Device radio button and enter the Filename if A: is selected.

9.Insert a non-write protected diskette in the A: drive if A: was selected.

10.Select the Create list button. An Operation In Progress message is displayed during the list operation.

11.A completion message is displayed when the operation is complete.

The panel's pushbuttons are:

Create list

Initiate the list database volumes operation

Cancel

Close the panel.

Help Display this help panel

Chapter 6. Advanced Operating Procedures 149

Page 171
Image 171
IBM Magstar 3494 manual Create list, Cancel