IBM Magstar 3494 manual Bytes 6±69, Message Code Message Text

single alpha character followed by four numeric characters. The alpha
character indicates which element/function in the VTS/Library generated the
message. The numeric characters are a sequential number for a speci®c
element/function. The element/function codes are de®ned as:
E	Export
I	Import
Byte 5:
Blank character
Bytes 6±69
Status Message Text

	Export Status Messages
Table 43. Export Status Messages
	Message Code	Message Text
		E0001	EXPORT PROCESSING STARTED FOR DESTINATION XXXXXXXXXXXXXXXX
			This message is generated when the VTS begins processing the logical volumes for a speci®c
			destination. The `XX...X' ®eld is replaced with the destination name from the export list ®le. The
			destination name is left justi®ed and padded with blanks if the destination name is less than 16
			characters. If the destination name in the export list ®le is all blanks, a destination name of 16
			question mark characters (`??...?') is used.
			Action: None, status only.
	E0002	EXPORTED LOGICAL VOLUMES ON YYYYYY READY FOR HOST PROCESSING
			This message is generated when all of the logical volumes on an exported stacked volume
			YYYYYY have been placed in the exported category and are ready for the host to process.
			Action: None, status only.
	E0003	EXPORT PROCESSING COMPLETED FOR DESTINATION XXXXXXXXXXXXXXXX
			This message is generated when the VTS has completed processing the logical volumes for a
			speci®c destination (including the host purging of the exported logical volume from the library
			manager inventory). The 'XX...X' ®eld is replaced with the destination name from the export list
			®le. The destination name is left justi®ed and padded with blanks if the destination name is less
			than 16 characters. If the destination name in the export list ®le is all blanks, a destination name
			of 16 question mark characters ( '??...?') is used.
			Action: None, status only.
	E0004	STACKED VOLUME YYYYYY FOR DEST XXXXXXXXXXXXXXXX IN EXPORT-HOLD
			This message is generated when the library has placed Exported Stacked Volume 'YYYYYY' in
			the Export-Hold category. The 'XXX...X' ®eld is replaced with the destination name from the export
			list ®le. The destination name is left justi®ed and padded with blanks if the destination name is
			less than 16 characters. If the destination name in the export list ®le is all blanks, a destination
			name of 16 question mark characters ('???...?') is used.
			Action: Operator may now use the Library Manager console pop-up window, Manage Export-Hold
			Volumes, to move the Exported Stacked Volume to the Eject category or to the Import category.
			Volumes in the Eject category will be ejected to the Convenience I/O station by the Library
			Manager.

Appendix B. Virtual Tape Server Import/Export Advanced Function 327