IBM Magstar 3494 manual Library library-name, CBR3773I Cartridge with unreadable or invalid

Table 12. DFSMS Messages Based on Library Failure or Exception Conditions (continued)

Resulting Console Message	Action
CBR3772I Duplicate volume volser left in input station	1.	Remove the volume from the input station.
in library library-name.	2.	Determine why the volume has a duplicate label.
An attempt was made to enter volume volser into library	3.	Clear the item from the Intervention Required pop-up
library-name. The volser is already recorded in the library
		window. See Table 19 on page 288 for details.
manager inventory, and the location assigned in the
inventory contains a volume with the volser. The entered
volume remains in the input station.
CBR3773I Cartridge with unreadable or invalid	1.	Remove the cartridge from the input station and
external label left in input station in library
		correct the problem with the external label, then
library-name.
		re-enter the cartridge into the library.
An attempt was made to enter a cartridge into library	2.	Clear the item from the Intervention Required pop-up
library-name. The external label on the cartridge is		window. See Table 19 on page 288 for details.
missing, unreadable, or contains an invalid character. The
cartridge remains in the input station.
CBR3774I Unexpected volume volser ejected from	1.	Remove the ejected cartridge from the output station.
library library-name.
	2.	Determine if the label is missing or damaged and
Volume volser is in an unexpected location in library		replace it if necessary.
library-name. Either no entry exists for the volser in the	3.	Determine which library the volume belongs in using
library manager inventory or the cartridge external label is
		interactive storage management facility (ISMF) tape
missing or unreadable. The cartridge was ejected from
		volume list application and place the volume in the
the library to a convenience output station.
		convenience input station of that library.
	4.	Clear the item from the Intervention Required pop-up
		window. See Table 19 on page 288 for details.
CBR3776I Volume volser inaccessible in library	1.	Go to the library and if an intervention-required
library-name.
		indication is displayed, determine whether it is for the
During the execution of a library operation, library		inaccessible volume by viewing the intervention
		conditions. If it is the inaccessible volume, follow the
library-namehas indicated that volume volser is
		instructions for the inaccessible condition.
inaccessible. The volume cannot be retrieved using
normal library automated function; manual intervention is	2.	If the intervention-required indication is not displayed
needed.		or the inaccessible volume is not one of the
		conditions listed, ®nd the volume record in the
		database. (Choose Search database for volumes
		from the Database pull-down.)
	3.	Place the library in pause mode.
	4.	Enter the library and ®nd the home cell the volume
		should have been in and search for it in the
		surrounding cells. If the database shows the volume
		in a device, check that device. If the volume is stuck
		in the device, call a service representative to remove
		the volume. If the volume is found, and after leaving
		the library, place it in the convenience input station.
	5.	Place the library in auto mode.
	6.	Resubmit the library request or job after the input
		station is inventoried.
CBR3777I Volume volser now accessible in library	Resubmit the library request or job that failed because
library-name.	the volume was inaccessible.
Volume volser, which was previously reported as
inaccessible, is retrieved and is now accessible for
automated operations in library library-name.

Chapter 8. Problem Determination Procedures 275