IBM Magstar 3494 manual From library library-namefor volume volser

Table 12. DFSMS Messages Based on Library Failure or Exception Conditions (continued)

Resulting Console Message	Action
CBR3726I Function incompatible error code error-code	Contact your system administrator.
from library library-namefor volume volser.
A request for a library operation with volume volser
cannot be processed by the library because the request
is incompatible with the con®guration or set of installed
features of the library.
If error-code=6, an attempt was made to eject a logical
volume from a Virtual Tape Server.
If error code = 7 or 8, a command for an Import or Export
was issued to a VTS partition that is not capable of
Export/Import.

It is also possible that the microcode in the library and the software are not at the correct level.

CBR3727I Control Unit and Library Manager		1.	If another tape subsystem is in the library, vary the
incompatible in library library-name, error code
			drives associated with the failed subsystem offline
error-code.
			and resubmit the request or job.
During processing of a library request in library		2.	Contact your service representative.
library-name, it was determined that the tape control unit
and the library manager are at incompatible software
levels. Error code error-codeindicates the nature of the
incompatibility.
CBR3728I Volume volser in use in library library-name.		1.	Determine why the volume is already in use.
{Already mountedMount pendingEject in
		2.	Resubmit the library request when the volume is no
progressEject pendingExport in progress}.
			longer in use.
A request for a library operation with volume volser
cannot be processed by the library because the volume is
already in use in the library. One of the following
situations is present:
v The volume is already mounted on another drive.
v A mount request for the volume is pending.
v The volume is currently being ejected from the library.
v An eject request is pending.
v The volume is being exported.
CBR3729I Library Manager for library library-name		1.	Check that the library manager is powered on and
offline.
			operator menu is active.
A library request was issued to Library library-name, but		2.	Check the Library manager ®eld of the System
			Summary window. It should indicate Online.
the library manager is offline. Possible causes are:
v	The library manager is powered off.	3.	If it does not indicate Online, use the Mode pull-down
v	The library manager is still in the process of		and place the library in the Online state. If the library
			will not go to the online state, call your service
	initialization.
			representative.
v	The library manager mode is set to offline.
		4.	Vary the library online at the host console.
		5.	Resubmit the request or job.

270Magstar 3494 Tape Library Operator Guide