IBM Magstar 3494 manual Operating in Manual Mode, Mount WCC007 Rack

Operating in Manual Mode

Figure 143 shows the Manual Mode Terminal pop-up window with the Action List screen.

Action List

Select an action. Press Enter to confirm action completion (except Mounts).

Action	VOLSER	From				To
Mount	WCC007	Rack	12	B 11		Device 3F1
Mount	WSB392	Rack	7	C	5	Device 3F0
Mount	TFW001	Device	201			Device 3F1
Mount	SCR023	Rack	12	E	6	Device 3F0
Mount	WRO112	Rack	3	J 13		Device 201
Mount	TGB041	Rack	4	F	3?	Device 200
Mount	ECR223	Rack	10	D 13		Device 3F1
Mount	SFC607	Rack	9	F	2	Device 3E1
Mount	FGG641	Rack	11	C 10		Device 200
Eject	ERV399	Rack	13	F 11

More actions are waiting.

Press the Refresh key (F9) to update the list.

F1=Help F3=HideScreen F4=Error F5=Insert F6=Review F9=Refresh F10=Locate

Figure 143. Manual Mode Terminal Pop-Up Window with Action List

Legend:

Action

The operator task. See the following procedures for details.

VOLSER

The cartridge volume serial number.

From The place where you should ®nd the cartridge speci®ed in VOLSER.

To The place where you should put the cartridge.

Device

The 3490E/3590 tape drive.

Rack The physical storage address that can contain one cartridge.

?The cartridge may not be in the location speci®ed. See Note 2.b on page 232.

The Action List screen presents tasks to perform. Perform the actions in the sequence listed (see Figure 143). Read the following Mount, Demount, Insert, and Eject procedures for how to perform each action.

The following are the function keys of the Action List screen:

F1 Displays instructions for performing Manual mode tasks.

F3 Hides this pop-up window (Manual Mode Terminal). The Manual Mode Terminal pop-up window is hidden but can be retrieved by selecting the Mode pull-down and then selecting Manual mode.

230Magstar 3494 Tape Library Operator Guide