IBM Magstar 3494 CHCK1 Library Manager Snmp Traps, Testm Library Manager Snmp Traps, Parameters

Category

Category change has been made to.

Parameters

Additional information, not currently supported.

Example:

3494 C2444 UNSOL 16 180 FF01 20 *Device Category Change

CHCK1 Library Manager SNMP Traps

This section discusses the format of the Library Managers CHCK1 messages. All CHCK1 Library Manager SNMP Traps have the same format.

The format for CHCK1 Library Manager SNMP Traps is as follows:

3494 [Library Sequence Number] CHCK1 [Errorcode] [Modifier] *A CHECK1 with errorcode: [Errorcode], and modifier: [Modifier], has occurred on [Library Sequence Number]

Example:

3494 C2444 CHCK1 BDDD 230 *A CHECK1 with errorcode: BDDD, and modifier: 230, has occurred on C2444

Note: All Library Manager SNMP trap messages are actually one line of text; some have been split in order to ®t on the pages of this document.

In this example, a BDDD CHECK1, with modi®er 230, occurred on C2444 3494 Tape Dataserver.

Errorcode

The errorcode will be a hexadecimal value between 0 and 0xFFFF

Modi®er

The modi®er is used by the CHECK1 for additional information about the condition. Valid values are 0 to 64K.

TESTM Library Manager SNMP Traps

This section discusses the TESTM Library Manager SNMP trap messages. All

Library Manager TESTM SNMP trap messages have the same format.

The format is as follows:

3494 [Library Sequence Number] TESTM *{User Message}

Example:

3494 C2444 TESTM *THIS IS A TEST, 5/26/98 - 10:30 am

In this example, the user entered the string ªTHIS IS A TEST, 5/26/98 - 10:30 amº. The asterix character (*) is automatically inserted in the Library Manager TESTM message. It is intended to aid the monitor station programmer.

Using the Options Pull-Down

Figure 139 on page 227 shows the Options pull-down.

226Magstar 3494 Tape Library Operator Guide