IBM Magstar 3494 manual Error Processing, Manual Mode Review List Screen

			Review		List
Action	VOLSER	From				To
Mount	GKT333	Rack	2	B	40	Device 200	Confirmed
Eject	SRJ485	Rack	1	A	7		Confirmed
Mount	EPF371	Device 200				Device 3E1	Confirmed
Mount	SDR495	Rack	7	A	6	Device 201	ERROR (see Note)

F1=Help F3=HideScreen F12=Cancel

Figure 146. Manual Mode Review List Screen

Note: The ERROR indication is caused by the operator pressing F4 on the Action List screen.

You can only view this screen. You perform the tasks (actions) from the Action List screen.

Error Processing

Use the following procedure to describe the problem to the host system if you cannot complete a mount or eject action:

1.Highlight the action item that you cannot complete on the Action List screen. Use the up or down arrow keys to highlight the questioned action.

2.Press the Error key (F4) on the Action List screen of the library manager.

3.Select the error description that best ®ts the problem. Use the up or down arrow keys to highlight the error description. See Figure 147 on page 237.

4.Press the Enter key to send the error description to the host processor.

Note: Press the Cancel key (F12) to replace the Error Processing screen with the Action List screen. No error message is sent.

236Magstar 3494 Tape Library Operator Guide