IBM Magstar 3494 manual Stacked Volume Map Pop-Up Window

Stacked Volume Map

The Stacked Volume Map pop-up window allows you to obtain a map of logical volumes that reside on a stacked volume. This function is only available if a VTS is installed in the library. See Figure 87 for a sample window.

Figure 87. Stacked Volume Map Pop-Up Window

Insert a blank, formatted diskette in drive A. The search will not proceed unless a diskette is in the drive.

Enter the stacked volume's Volser in the edit ®eld then select the ªGet mapº button. A message ªSearch in progressº is displayed while the search is occurring. The appropriate VTS is interrogated for the map of the stacked volume.

The logical volumes are retrieved 100 at a time from the appropriate VTS. A message is displayed when the complete map is received successfully.

The stacked volume map will be stored on the A: diskette in a ®le named

STxxxxxx.MAP where xxxxxx is the stacked volume VOLID.

Messages describing why the search failed are displayed if the search is not successful.

The output ®le is in the following format:

Version: 00001

Time and Date of Map: 13:40:24 04/24/1998

Library Sequence Number: 12345

Customer ID: IBM Global Services

Stacked Volser: BAR010

Number of Logicals: 120 LOG000

LOG010

LOG234

.

.

.

LOG465 SPAN

150Magstar 3494 Tape Library Operator Guide