IBM Magstar 3494 Volume Volser could not be rewound, Volume Volser could not be closed, Records

Table 45. Export-Import List Volumes Failure Reason Text	(continued)
Failure-Reason Text Ð Probable cause.	Recommended Action
Volume <VOLSER> could not be opened	Call your IBM Service Representative.
VTS failure.
Volume <VOLSER> could not be rewound	Call your IBM Service Representative.
VTS failure.
Volume <VOLSER> could not be closed	Call your IBM Service Representative.
VTS failure.
Volume <VOLSER> , unable to locate Export List	Check source data used for preparation of the Import List
Records	Volume or Export List Volume.
No records were found in the Export List ®le on the
Volser speci®ed.
Volume <VOLSER> unable to locate Import List	Check source data used for preparation of the Import List
Records	Volume or Export List Volume.
No records were found in the Import List ®le on the
Volser speci®ed.
Volume Label, read error	Call your IBM Service Representative.
Volume Label record could not be read successfully.
Volume Label , compacted	Check JCL which prepared the Import/Export List Volume.
Volume Label record was compacted data.
Volume Label, error converting Label Identi®er	Check JCL which prepared the Import/Export List Volume.
The EBCDIC ®eld did not convert to ASCII correctly.
Volume Label, incorrect Label Identi®er	Check JCL which prepared the Import/Export List Volume.
The characters 'VOL1' were not found in the Label
Identi®er and Label Number ®elds of the Volume Label.
Volume Label, error converting Volser	Check JCL which prepared the Import/Export List Volume.
The EBCDIC ®eld did not convert to ASCII correctly.
Volume Label, Volser Mismatch	Call your IBM Service Representative.
The Volser found in the Volume Label does not match the
Volser speci®ed in the Export/Import operation.
Volume Label, found tape mark instead	Check JCL which prepared the Import/Export List Volume.
Tape Mark was found which is not in the correct format
sequence.
Volume Label, unexpected End of Tape	Check JCL which prepared the Import/Export List Volume.
The End of Tape was reached unexpectedly when
attempting to read the Volume Label.
Volume Label, record is not 80 bytes	Check JCL which prepared the Import/Export List Volume.
The Volume Label record is not 80 bytes.
<File> <record>, read error	Call your IBM Service Representative.
When attempting to read the indicated Record from the
Tape Volume Cache, a read error occurred.

332Magstar 3494 Tape Library Operator Guide