IBM Magstar 3494 manual Virtual Tape System z has a CHECK1 xxxx failure

Table 22. Intervention Required Conditions relating to a Virtual Tape Server in the Library (continued)

Intervention Required Condition	Resolution Actions
Message	1. Record the error code and contact your service
Virtual Tape System z has a CHECK1 (xxxx) failure.	representative.
	2. The Virtual Tape Server will restart itself.
Probable Cause	3. Restart all active host jobs.
An error was detected in Virtual Tape Server z that
cannot be recovered. The error could be a result of
hardware or internal software problems. The Virtual Tape
Server Controller will automatically restart itself. Any host
jobs using virtual volumes and devices are abended and
any data that has not been written to the Tape Volume
Cache is lost.
Message	1. Insert more 3590 cartridges into the library. Make sure
Free storage threshold has been crossed. (VTS z)	their volume serial numbers are within the range of
	stacked volumes de®ned for Virtual Tape Server
Probable Cause	reporting the condition.
	2. The VTS Active Data panel for Virtual Tape Server will
The available free space in Virtual Tape Server z has
	be updated to re¯ect any newly added stacked
fallen below the threshold set through the Set VTS	volumes on the hour.
Management Policies panel on the library manager.
Message	1. Remove the cartridges from the I/O station.
During the disaster recovery process, a stacked	2. If possible, repair the cartridge and place in the
	convenience I/O station.
volume xxxxxx and has been ejected. (VTS z)
Probable Cause
During the disaster recovery process, Virtual Tape Server
z could not read the recovery information on stacked
volume xxxxxx. Error recovery was unsuccessful. The
media may have been damaged during the disaster. The
cartridge is placed in the convenience I/O station.
Message	1. Notify your System Administrator.
Database restore from stacked volume xxxxxx failed,
attempting restore from next most recent. (VTS z)
Probable Cause
During the disaster recovery process, Virtual Tape Server
z could not successfully recover the database from
stacked volume xxxxxx. Error recovery was unsuccessful.
The media may have been damaged during the disaster.
Message	1. Notify your system administrator.
Insert of logical volume xxxxxx failed during disaster
recovery. (VTS z)
Probable Cause
During the disaster recovery process, logical volume
xxxxxx could not be added to the library manager
inventory. It may be because the volser is already in the
inventory or the library is already at the logical volume
limit or the volser con¯icts with a physical volume's volser
that is already in the library.

298Magstar 3494 Tape Library Operator Guide