IBM Magstar 3494 manual Symptom Description and Possible Solution

Remote Library Manager Console Problem Analysis and Operational Tips

Table 10 shows the fault symptoms and describes possible solutions to problems with the remote library manager console functions.

Table 10. Fault Symptoms

Symptom	Description and Possible Solution
The library	When a session is active, the library manager keyboard is locked. In
manager	this case, use the Alt+T hot-key combination to regain control at the
keyboard is	library manager.
locked.
EQN0516 or	Ensure that the communications manager is started. If the session state
EQN0524 error	takes too long because of network traffic, you may receive this error on
	the remote library manager console. Close the warning window for this
	error and retry the connection.
The pointing	As you move a window with the pointing device from the remote library
device button	manager console, if you drag a window (of the library manager) so high
commands to the	that its top goes out of the visible region on the remote (controlling)
library manager	console, you are moving the pointing device out of the DCAF session.
are ignored.	Therefore, the pointing device button actions are not sent to the library
	manager until the pointing device is moved back into the active session
	window at the library manager. When you move back into the active
	session, the window on the library manager appears to move with the
	pointing device and not drop, even though the pointing device button
	has been released. Click the pointing device button again to drop the
	window where you want the window to drop.
The library	If you perform an operation that is not allowed on the remote library
manager console	manager console, the library manager console beeps once.
beeps.

Chapter 7. Remote Library Manager Console Feature 257