IBM Magstar 3494 manual Duplicate volser xxxxxx was ejected to, Duplicate volser xxxxxx was left

Table for Intervention Conditions of External Cartridge Labels

Table 19. Intervention Required Conditions relating to external cartridge labels

Intervention Required Condition	Resolution Actions
Message	1.	Remove the cartridge from the convenience I/O
A duplicate volser (xxxxxx) was ejected to the		station.
convenience I/O station.	2.	Determine why the cartridge is a duplicate and take
Probable Cause		corrective action.
During an inventory or inventory update operation, a
cartridge was found whose external volume serial
number, xxxxxx, is the same as that of another cartridge
in the library. The volume was placed in the convenience
I/O station. The library does not support more than one
cartridge with the same volume serial number.
Message	1.	Place the library system in pause mode.
A duplicate volser (xxxxxx) was ejected to	2.	Open the appropriate enclosure door.
high-capacity facility cell: yyyy.	3.	Remove the cartridge from the high-capacity facility.
Probable Cause	4.	Determine why the cartridge is a duplicate and take
		corrective action.
During an inventory or inventory update operation, a	5.	Close the enclosure door.
cartridge was found whose external volume serial	6.	Place the library system in auto mode.
number, xxxxxx, is the same as that of another cartridge
in the library. The convenience I/O station is either not
installed, is full or is unavailable. The volume was placed
in high-capacity facility cell, yyyy. The library does not
support more than one cartridge with the same volume
serial number.
Message	1.	Remove the cartridge from the convenience I/O
A duplicate volser (xxxxxx) was left in the		station.
	2.	Determine why the cartridge is a duplicate and take
convenience I/O station.
		corrective action.
Probable Cause
During an insert operation, a cartridge was found whose
external volume serial number, xxxxxx, is the same as
that of another cartridge in the library. The library does
not support more than one cartridge with the same
volume serial number.
Message	1.	Place the library system in pause mode.
A duplicate volser (xxxxxx) was left in high-capacity	2.	Open the appropriate enclosure door.
facility cell: yyyy.	3.	Remove the cartridge from the high-capacity facility.
Probable Cause	4.	Determine why the cartridge is a duplicate and take
		corrective action.
During an insert operation, a cartridge was found in	5.	Close the enclosure door.
high-capacity facility cell, yyyy, whose external volume	6.	Place the library system in auto mode.
serial number, xxxxxx, is the same as that of another
cartridge in the library. The library does not support more
than one cartridge with the same volume serial number.

288Magstar 3494 Tape Library Operator Guide