IBM Magstar 3494 manual Exported Stacked Volume processing error

Table 42. Status Codes and Status Text (continued)
Operation Status	Resolution Actions
Status Code	Suspected media failure, call an IBM Service
	Representative.
28
Status Text
Exported Stacked Volume processing error
Probable Cause
On Import, the ®le on the Exported Stacked
Volume containing the list of logical volumes
stored on the Exported Stacked Volume could
not be read without error.
Status Code	Call an IBM Service Representative.
29
Status Text
Orphaned logical volume
Probable Cause
On Export, the VTS storage management code
does not recognize the logical volume volser;
therefore, the logical volume cannot be exported.
Status Code	1.	Check host systems attached to the VTS to insure
		that they are processing volumes in the insert
30
		category.
Status Text	2.	If the check above indicates that there is at least one
Logical volume assigned to insert category
		host which is processing volumes in the insert
Probable Cause		category, determine why the speci®c volume has not
For Export, the logical volume is currently		been processed.
assigned to the insert category. Volumes in the
insert category have not been accepted by a
host and cannot be exported.
Status Code	Call an IBM Service Representative.
31
Status Text
Exported Stacked Volume unload failure
Probable Cause
For Import, the Exported Stacked Volume volser
found in the Physical Volume ®eld of the Status
File record was used for importing logical
volumes and could not be demounted from the
tape drive and may not have been returned to
the Import category.

Appendix B. Virtual Tape Server Import/Export Advanced Function 325