IBM Magstar 3494 manual Update LAN Host Information, Delete LAN Host from Library Pop-Up Window

Figure 121. Delete LAN Host from Library Pop-Up Window

Host Alias (optional)

The alias for a host is a customer supplied nickname for that host. This is an optional ®eld and may be left blank if an alias is not desired.

Host Name

This ®eld lists the names of all hosts that are con®gured with the library system via LAN.

For TCP/IP hosts, the Host Name is the Hostname de®ned in the TCP/IP network. In Figure 121, rs6000.tucson.com is a TCP/IP Hostname.

For APPC and APPC/VTAM hosts, the Host Name is a combination of the Host Network ID and the Host Location Name. For example, if the Host Network ID is USIBMSU, and the Host Location Name is S10A4045, then the Host Name is USIBMSU.S10A4045.

This window displays the host names and (if set up) the host aliases of all the hosts that are con®gured with the library system via LAN. Select the host to be deleted and select the OK button.

A caution window will pop up to make sure that you really want to delete this host. Selecting the Yes button on this window will delete the host from the library system. The following are the push-buttons:

OK Delete the selected host from the library system.

Cancel

Close this window without deleting a host.

Help Display the help panel.

Update LAN Host Information

Figure 122 on page 192 shows the Update Host Information pop-up window. This pop-up window allows a particular LAN connected host to be selected to update

Chapter 6. Advanced Operating Procedures 191