IBM Magstar 3494 manual Check intervention required messages on the library

Table 42. Status Codes and Status Text	(continued)
Operation Status		Resolution Actions
Status Code		1.	Check intervention required messages on the library
			manager console for the reason why the recall failed.
1F
Status Text		2.	Correct the reason and retry the export operation.
Logical Volume Recall Failed
Probable Cause
The fragment ®le for a logical volume being
exported did not contain the logical volume's
tape label records so the VTS subsystem
attempted to perform a recall of the logical
volume. The recall failed so the logical volume
was not exported.
Status Code		Call an IBM Service Representative.
20
Status Text
Library Manager Error
Probable Cause
The logical volume could not be exported
because of a library manager reported error
during export processing.
Status Code		1.	Add physical volumes to the VTS.
21		2.	Retry the operation.
Status Text
Terminated - out of scratch
Probable Cause
The logical volume could not be exported or
imported because the operation was terminated
after waiting 60 minutes for a scratch stacked
volume to be made available to the VTS.
Status Code		1.	Determine why the hosts attached to the VTS are not
			responding to the request to process exported
22
			volumes.
Status Text		2.	Retry the operation.
Terminated - waiting for host response
Probable Cause
The logical volume could not be exported
because the export operation was terminated
due to inactivity for 60 continuous minutes while
processing the volumes assigned to the
exported category. It is likely there are no
operational hosts attached to the VTS.

Appendix B. Virtual Tape Server Import/Export Advanced Function 323