IBM Magstar 3494 Field Name Action LAN Attach Ports, Convenience I/O Mode, Inventory Update

Table 13. Problem Determination with the System Summary Window (continued)
Field Name	Action
LAN Attach Ports	The number in this ®eld is not, by itself, an indication of
A decimal count of the number of LAN attached hosts	failure. If there seems to be a problem communicating
	with a host, choose Status and then select LAN Status
that are currently initialized with the 3494. If no hosts are	to view the status of all LAN attached hosts. Select the
initialized with the 3494, this shows as a dash. For	host in question from the list of hosts and note the last
example, if there are three hosts initialized with the 3494,	two columns of the screen. If the host is currently
this number is 3. If one host goes down, this number will	initialized, the column labeled Init contains a 1.
change to 2 when the 3494 tries to communicate with
that host.	If a host was initialized and something happened to
	cause the host to appear to go down (to the 3494), the
	column labeled Init will be a 0, since the 3494 is not
	currently initialized with that host, and the column labeled
	Prev Init will be a 1, since that host was initialized at one
	time with the 3494. This ®eld is only accurate since the
	last time the 3494 Library Manager was started.
Convenience I/O	Contact your service representative to teach the
Empty or Volumes present should be indicated.	system or make the Convenience Input¤Output Station
	available.
Unknown shows the system has not been taught or the
Convenience Input¤Output Station has been made
unavailable.
Convenience I/O Mode	Contact your service representative to teach the
Insert or Import should be indicated. Unknown implies	system or make the Convenience Input¤Output Station
	available.
that an error has occurred while attempting to determine
the mode.
High-Capacity Status	Contact your service representative.
Failed shows the high-capacity operation has failed to
complete.
Inventory Update	Contact your service representative.
Failed shows the inventory update operation has failed to
complete.
Overall System	Contact your service representative if Failed is indicated.
OK should be indicated. Degraded shows that a	If Degraded persists, also contact your service
	representative.
component in the library has failed but the library
continued to operate. Failed shows that a component has
failed and operations cannot continue.
Accessor	1. Attempt to return library to Auto Mode.
OK should be indicated. Failed shows that the accessor	2. If problem persists, contact your service
	representative.
(or both accessors if Model HA1 is installed) has failed or
has been made unavailable and operations cannot be
completed. Degraded shows that one accessor in an
HA1 system has failed or been made unavailable.
Gripper	Contact your service representative.
OK should be indicated. Failed shows that the gripper (or
both grippers if Model HA1 is installed) has failed or has
been made unavailable and operations cannot be
completed. Degraded shows that at least one gripper in
an HA1 system has failed or been made unavailable.

278Magstar 3494 Tape Library Operator Guide