IBM Magstar 3494 CBR3757E Library library-namein paused/manual, Mode operational state, Paused

Table 12. DFSMS Messages Based on Library Failure or Exception Conditions (continued)

Resulting Console Message	Action
CBR3755E {InputOutput} door open in library	Go to the library and close the station door. There is also
library-name.	an intervention-required condition set for this condition. It
One of the following situations has been detected in	is automatically cleared when the station door is closed.
library library-name:
v The station door has been open for more than 5
minutes.
v An eject operation cannot be completed because the
door is open.
This message is retained on the console until the open
door has been closed.
CBR3757E Library library-namein {paused/manual	1. The library may no longer be in auto mode because
mode} operational state.
	of an operational requirement such as high-capacity
Library library-nameis not running in auto (normal) mode.	I/O or service.
	2. If no operation or service was planned for the library
The operational state (mode) is one of the following:
	that would have caused the change in mode, go to
Paused
	the library and determine why it is no longer in auto
All mechanical motion in the library has stopped.	mode.
Paused mode is entered automatically when a	3. If there are intervention-required conditions at the
failure in the library prevents further automated
	library, perform them and then return the library to
operation, or entered by a command from the
	auto mode.
library manager operator console. The library
	4. If a repair action is required, contact your service
manager continues to accept orders from the
	representative.
host, but queues them for execution after pause
mode changes to auto or manual mode.
Manual mode
All mechanical motion within the library has
stopped. Manual mode is entered by command
from the library manager operator console. The
library manager continues to accept orders from
the host and instructs the operator to manually
perform the functions that are normally done
automatically, such as volume fetch and
mounting.
This message is retained on the console until the library
has returned to the automated operational state.
CBR3758E Library library-nameoperation degraded.	1. Contact your service representative.
One or more components of library library-namehave	2. There also may be one or more intervention-required
	conditions at the library to perform.
failed or otherwise become unavailable for use. The
library is continuing to function, but performance may be
degraded. If this message is accompanied by the
CBR3760E Library library-namevision system not
operational message, audit and eject requests cannot be
performed and volumes cannot be added to the library.
This message is retained on the console until all library
facilities have become fully operational.

272Magstar 3494 Tape Library Operator Guide