Operational State Change SNMP Traps
The Operational State Change message format is as follows:
3494 [Library Sequence Number] UNSOL 13 [Mode] [State] [Degraded] [Safety
Enclosure Interlock Open] [Vision System Non-Operational] [Intervention
Required] [Check1] [Storage Cells Full] [Out of Cleaners] [Dual Write
Disabled] [Smoke Detected] [Manual Mode] *Operational State Change
Library Sequence Number
Unique Library Sequence Number of the 3494 TapeDataserver that
generated the SNMP trap message.
Mode It will be one of the following:
vAUTO
vPAUSE
vMANUAL
State It will be one of the following:
vONLINE
vOFFLINE
Degraded
It will be one of the following:
v
vDEGRAD
Safety Enclosure Interlock Open
It will be one of the following:
v
vSO
Vision System Non-Operational
It will be one of the following:
v
vVN
Intervention Required
It will be one of the following:
v
vIR
Check1It will be one of the following:
v
vC1
All Storage Cells Full
It will be one of the following:
v
vSF
Out of Cleaners
It will be one of the following:
v
vOC
Chapter6. Advanced Operating Procedures 223