Cartridge Storage Cells

The cartridge cell locations are named so the operator can ®nd the cartridges during Manual mode operation. The cell name consists of three values: a wall number, a column letter, and a row number. For example, Figure 19 shows cell location 2 A 1.

Figure 19. Cartridge Storage Cell Names

Figure 20 on page 25 shows the cartridge storage cell labeling.

Wall number

The wall numbers „3… that are even-numbered represent the walls on the front doors of the library. The wall numbers that are odd-numbered represent the walls on the rear of the library.

Column letters

The column letters „1… range from A to E and are labeled from left to right.

Note: The control unit frame has only four columns; therefore, the letter range is from A to D.

Row numbers

The row numbers „2… range from 1 to 20 or from 1 to 40, depending on the frame and the wall. The numbers start with 1 at the top of the frame and end at 40 for the lowest row.

24Magstar 3494 Tape Library Operator Guide

Page 46
Image 46
IBM Magstar 3494 manual Cartridge Storage Cells, Wall number, Column letters, Row numbers