IBM Magstar 3494 manual Ethernet Format Check Box

	10005A1E3338, or a locally administered address (LAA), such as
	400012345678. Only hexadecimal digits can be entered. Blank spaces are
	invalid.
Ethernet Format Check Box
	If the adapter address is in Ethernet Format, check this box.
XID (optional)
	(Exchange ID) This is an optional ®eld. If left blank, the XID will be assigned
	a value of ²00000000². If an XID value is entered, it must be either ®ve or
	eight hexadecimal bytes. If only ®ve bytes are entered, the pre®x²05D² will
	be used.
	Note: XID is optional for APPC and APPC/VTAM hosts. Not applicable for
	TCP/IP hosts.
Note: If the host is AS/400, the following commands on the AS/400 will provide the
	information needed to update the Change LAN Host Information screen:
	v If the AS/400 operating system is less than version V3R6, use
	DSPLANMLD, Display LAN Information.
	v If the AS/400 operating system is version V3R6, or higher, use
	DSPLANMLB, Display LAN Media Library Information.
The following are the push-buttons on the Change Host Information pop-up window:
OK	Update the LAN host information using the changes entered on this
	window.
Cancel
	Close the panel without updating the host information.
Help	Display the help panel.
Figure 125 on page 197 shows the Change Host Information pop-up window for
APPC/VTAM hosts. This pop-up window allows information about a LAN host to be
changed in the 3494 con®guration. When this is done, the 3494 responds to the
host with the new con®guration data.

196Magstar 3494 Tape Library Operator Guide