StarTech.com ECS0016 manual Network Configuration, Time Zone, IP Configuration Dhcp

Instruction Manual

The following command will synchronize the live system with the new configuration:

# /bin/config –-run=time

Time Zone

To change the system time zone USA eastern standard time you need to issue the following commands:

# /bin/config –-set=config.system.timezone=US/Eastern

The following command will synchronize the live system with the new configuration.

# /bin/config –-run=time

Network Configuration

IP Configuration - DHCP

To enable a DHCP client on the LAN interface (eth0) from the gateway command line:

# /bin/config –-set=config.interfaces.eth0.mode=dhcp

The following command will synchronize the live system with the new configuration.

# /bin/config –-run=ipconfig

Note: “/bin/config” commands can be combined into one command for convenience.

Please note that supported interface modes are ‘dhcp’ and ‘static’.

95