Instruction Manual

positive number, or -1. 0s are shut down first, then 1s, 2s, etc. -1s are not shut down at all. Defaults to 0

7.Select the Driver that will be used to communicate with the UPS. The drop down menu presents full selection of drivers from the latest Network UPS Tools (NUT version 2.2.0) and additional information on compatible Ups hardware can be found at http://www.networkupstools. org/compat/stable.html

8.Click New Options in Driver Options if you need to set driver-specific options for your selected NUT driver and hardware combination (more details at http://www.networkupstools.org/doc)

9.Check Log Status an specify the Log Rate (minutes between samples) if you wish the status from this UPS to be logged. These logs can be views from the Status: UPS Status screen

10.Check Enable Nagios to enable this UPS to be monitored using Nagios central management

11.Click Apply

You can also customize the upsmon, upsd and upsc settings for this UPS hardware directly from the command line

Configure UPS Powering the Console Server

A Monitored UPS is a UPS that the ECS0016 is drawing power through. The purpose of configuring a Monitored UPS is in the event of a power failure, it provides an opportunity to perform any “last gasp” actions before power is lost. This is achieved by placing a script in /etc/config/scripts/ ups-shutdown - you may use the /etc/scripts/ups-shutdown as a template. This script is run when then UPS reaches critical battery status.

39

Page 46
Image 46
StarTech.com ECS0016 manual Configure UPS Powering the Console Server