Instruction Manual
disconnects from the applicable Host or Serial Port, or when a Slave con- nects or disconnects from the applicable UPS
Serial Port Signal Alert: This alert will be triggered when the speci- fied signal changes state and is applicable to serial ports only. You must specify the particular Signal Type (DSR, DCD or CTS) trigger condition that will send a new alert
Serial Port Pattern Match Alert: This alert will be triggered if a regular expression is found in the serial ports character stream that matches the regular expression you enter in the Pattern field. This alert type will only be applied serial ports
UPS Power Status Alert: This alert will be triggered when the UPS power status changes between on line, on battery, and low battery. This alert type will only be applied to UPSes.
Click Apply, once you’ve made your selection(s).
Remote Log Storage
Before activating Serial or Network Port Logging on any port or UPS log- ging, you must specify where those logs are to be saved:
•Select the Alerts & Logging: Port Log menu option and specify the Server Type to be used as well as the details to enable log server access
Serial Port Logging
In Console Server mode, activity logs can be maintained of all serial
67
