StarTech.com ECS0016 manual Users, Supported Protocol Configuration, Telnet Access LAN Disabled

Instruction Manual

Supported stop-bits values are ‘1’, ‘1.5’ and ‘2’.

Supported flow-control values are ‘Hardware’, ‘Software’ and ‘None’.

Supported Protocol Configuration

To ensure remote access to serial port 5 is configured as follows (denoted by bolded text), you would need to issue the following commands (de- noted with italicized text):

Telnet Access LAN: Disabled

# /bin/config –-set=config.ports.port5.ssh=on

SSH Access LAN: Enabled

# /bin/config –-del=config.ports.port5.telnet

Raw TCP via LAN: Disabled

# /bin/config –-del=config.ports.port5.tcp

The following command will synchronize the live system with the new configuration.

# /bin/config –-run=serialconfig

Please Note: “/bin/config” commands can be combined into one com- mand for convenience

Users

You can add a User to the system from the command line by following the following instructions:

Determine the total number of existing Users (if you have no existing Us- ers) you can assume this is 0.

#/bin/config –-get=config.users.total

This command should display: config.users.total 1

100