StarTech.com ECS0016 manual Date and Time Configuration, Manually Change Clock Settings

Instruction Manual

LDAP Base Node: Some base node

# /bin/config –-set=”config.auth.ldap.basenode=some base node”

The following command will synchronize the live system with the new configuration.

# /bin/config –-run=auth

Date and Time Configuration

Manually Change Clock Settings

To change the running system time you need to issue the following com- mands:

# date 092216452005.05 Format is MMDDhhmm[[CC]YY][.ss]

Then the following command will save this new system time to the hard- ware clock:

# /bin/hwclock –systohc

Alternately to change the hardware clock time you need to issue the fol- lowing commands, Where the format is MMDDhhmm[[CC]YY][.ss]:

# /bin/hwclock --set --date=092216452005.05

Then the following command will save this new hardware clock time as the system time:

# /bin/hwclock –hctosys

Network Time Protocol

To enable NTP using a server at pool.ntp.org issue the following com- mands:

#/bin/config –-set=config.ntp.enabled=on

#/bin/config –-set=config.ntp.server=pool.ntp.org

94